Silicone Sponge To Learn More about Auburn
Strip-N-Stick™, please contact an Auburn Customer Service Representative. Additional technical assistance and/or samples are available upon request…

Strip-N-Stick™
Silicone Sponge Tape

100S Strip-N-Stick™
200A Strip-N-Stick™
300AR Strip-N-Stick™

Strip-N-Stick™
Silicone Foam Tape

512AF Strip-N-Stick™

Strip-N-Stick™
Silicone Solid Tape

440S Strip-N-Stick™
440A Strip-N-Stick™

Product Datasheets from Auburn’s Adhesive-Program:
SP-2021 Silicone Adhesive
AP-2022 Acrylic Adhesive
Hi-Temp Acrylic Adhesive
Silicone Sponge
STRIP-N-STICK™ TAPE -
Silicone Sponge Tape, Silicone Foam Tape & Silicone Solid Tape
Introduction
Auburn Strip-N-Stick™ Tape provides all the benefits of silicone rubber along with an easy-to-apply, pressure-sensitive adhesive. Available in closed-cell sponge, low density foam, or solid silicone, these products offer superior service life, excellent conformability and flexibility, low-compression set, and high adhesion to a variety of materials. Service temperatures range from
-100°F to + 500°F (-73°C to + 260°C). Available with silicone or acrylic adhesives, Auburn
Strip-N-Stick™ Tape
is excellent for high/low temperature gasket applications, thermal insulation, cushioning, electrical isolation, and vibration dampening.

Standard Products:
100S is a silicone sponge with high temperature silicone adhesive. 200A is a silicone sponge with an aggressive acrylic adhesive. 300AR is reinforced silicone sponge with an aggressive acrylic adhesive. Its unique construction provides compressibility of sponge plus dimensional stability of fiberglass reinforcement. 440S is a 30 durometer solid silicone rubber with high temperature silicone adhesive. 440A combines 30 durometer solid silicone rubber with high-adhesion acrylic adhesive for an excellent gasket material. It provides high elongation and good conformability. 512AF Fire Blocking Silicone Foam is a low-density open-cell foam, to which an aggressive acrylic adhesive is affixed.

Availability:
Auburn silicone adhesive-backed tapes are available in many standard thicknesses - .031”, .062”, .093”, .125”, .187”, .250”, .375” & .500”. Non-standard thicknesses are available upon request. Auburn silicone sponge tapes, silicone foam tapes, and silicone solid tapes are available in either 36” wide master log rolls or slit rolls. Slit roll widths will vary from .250” wide up to 36” wide, depending up the particular needs of the customer.

Adhesive Backings:
The self-adhering Strip-N-Stick™ tapes - silicone sponge tapes, silicone foam tapes, silicone solid tapes,- permit substantial savings because they are easy to apply, simplify production, and eliminate the high cost of bonding. The SP-2021 Silicone Adhesive withstands the same temperature extremes, -100°F to +500°F, as the silicone rubber sheet. The AP-2022 Acrylic Adhesive has a temperature range of -40°F to + 300°F and offers the advantage of twice the adhesion to steel and a longer shelf life than silicone adhesive. New to our product line is the High-Temperature Acrylic Adhesive, whose 450° F operating temperature and powerful bonding capability now make it the adhesive of choice in many applications. All of these self-adhering adhesive-backed silicone tape products are protected with an easy-to-remove peel-off liner for application to a clean, dry, degreased surface.


Ordering Information & Special Orders
Please contact your Auburn Customer Service Representative to obtain price quotations. Products whose durometers, hardnesses, colors or densities aren’t listed as standard are also available upon request. To receive further technical assistance, material recommendations or samples, please contact your Auburn Customer Service Representative.